ramips: add support for OpenFi 5Pro #12196
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
huangsvengood
force-pushed
the
master
branch
5 times, most recently
from
dc224b0
to
68c844c
Compare
|
@aiamadeus 你好 已经按建议修改了 麻烦有空的时候再帮忙看看 |
OpenFi 5Pro is a 2.4/5 GHz band 11ac router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 512 MB - Flash : SPI-NOR 64MB (W25Q512) - WLAN : 2.4/5 GHz 2T2R (MediaTek MT7603e/MT7613) - Ethernet : 2x 10/100/1000 Mbps - LEDs/Keys (GPIO) : 3x/2x - UART : 1xUART - settings : 115200n8 How to upgrade image in uboot 1. press reset button when boot for 5sec. 2. access 192.168.21.1 in web ui. 3. select image and upload
github-actions bot
added a commit
to lumia9201/lede1
that referenced
this pull request
May 28, 2024
* https://github.com/coolsnowwolf/lede: ramips: add support for OpenFi 5Pro (coolsnowwolf#12196)
github-actions bot
added a commit
to wqj-1971/lede
that referenced
this pull request
May 28, 2024
* https://github.com/coolsnowwolf/lede: ramips: add support for OpenFi 5Pro (coolsnowwolf#12196)
github-actions bot
added a commit
to zjun-xy/lede
that referenced
this pull request
May 28, 2024
* https://github.com/coolsnowwolf/lede: ramips: add support for OpenFi 5Pro (coolsnowwolf#12196)
github-actions bot
added a commit
to Peter4W/lede
that referenced
this pull request
May 28, 2024
* https://github.com/coolsnowwolf/lede: ramips: add support for OpenFi 5Pro (coolsnowwolf#12196)
github-actions bot
added a commit
to cayercarelys/lede
that referenced
this pull request
May 28, 2024
* https://github.com/coolsnowwolf/lede: (60 commits) ramips: add support for OpenFi 5Pro (coolsnowwolf#12196) hostapd: fix mbo module build kernel: bump 6.6 to 6.6.32 (coolsnowwolf#12186) kernel: bump 6.1 to 6.1.92 (coolsnowwolf#12187) mtd: spi-nor: add support for Winbond W25Q512 mvebu: add support for QNAP QHora-321/322 with commo image base-files: add legacy-sdcard sysupgrade support kernel: bump 5.4 to 5.4.277 (coolsnowwolf#12191) kernel: bump 5.10 to 5.10.218 (coolsnowwolf#12190) kernel: bump 5.15 to 5.15.160 (coolsnowwolf#12188) ramips: add support for H3C TX180x series devices mediatek: fix broken PCIe caused by kernel update linux-firmware: realtek: update rtl8821ae firmware mediatek: filogic: mt7988: mark RTC clock as critical generic: 5.15: rename patches to match correct version mediatek: filogic: enable driver for MediaTek XS-PHY arm-trusted-firmware-mediatek: add mt7981 ddr4 builds kernel: asymmetric: Add missing dependency on CRYPTO_SIG for 6.6 ramips: improve AP-MT7621A-V60 EVB support kernel: bump 5.4 to 5.4.276 (coolsnowwolf#12175) ...
github-actions bot
added a commit
to BCYDTZ/lede
that referenced
this pull request
May 28, 2024
* https://github.com/coolsnowwolf/lede: ramips: add support for OpenFi 5Pro (coolsnowwolf#12196)
github-actions bot
added a commit
to ZingLix/lede
that referenced
this pull request
May 28, 2024
* https://github.com/coolsnowwolf/lede: ramips: add support for OpenFi 5Pro (coolsnowwolf#12196)
github-actions bot
added a commit
to barton0426/lede
that referenced
this pull request
May 28, 2024
* https://github.com/coolsnowwolf/lede: ramips: add support for OpenFi 5Pro (coolsnowwolf#12196)
github-actions bot
added a commit
to 01-Life/lede
that referenced
this pull request
May 28, 2024
* https://github.com/coolsnowwolf/lede: ramips: add support for OpenFi 5Pro (coolsnowwolf#12196)
github-actions bot
added a commit
to rachelchen1215/lede
that referenced
this pull request
May 28, 2024
* https://github.com/coolsnowwolf/lede: ramips: add support for OpenFi 5Pro (coolsnowwolf#12196)
github-actions bot
added a commit
to xiaohong001/lede
that referenced
this pull request
May 28, 2024
* https://github.com/coolsnowwolf/lede: ramips: add support for OpenFi 5Pro (coolsnowwolf#12196)
github-actions bot
pushed a commit
to UtMetoo/OpenWRT_Lede
that referenced
this pull request
May 28, 2024
* https://github.com/coolsnowwolf/lede: ramips: add support for OpenFi 5Pro (coolsnowwolf#12196)
github-actions bot
pushed a commit
to zesming/lede
that referenced
this pull request
May 29, 2024
* https://github.com/coolsnowwolf/lede: ramips: add support for OpenFi 5Pro (coolsnowwolf#12196)
github-actions bot
added a commit
to oldskooler/lede
that referenced
this pull request
May 31, 2024
* https://github.com/coolsnowwolf/lede: x86: 6.6: Activate CONFIG_FB_DEVICE kernel: Add CONFIG_FB_DEVICE to kmod-fb ramips: add support for JDCloud RE-CP-02 ramips: gl-mt1300: downclock SPI to 50MHz build: introduce PKG_BUILD_FLAGS ramips: add support for OpenFi 5Pro (coolsnowwolf#12196) hostapd: fix mbo module build kernel: bump 6.6 to 6.6.32 (coolsnowwolf#12186) kernel: bump 6.1 to 6.1.92 (coolsnowwolf#12187) mtd: spi-nor: add support for Winbond W25Q512 mvebu: add support for QNAP QHora-321/322 with commo image base-files: add legacy-sdcard sysupgrade support kernel: bump 5.4 to 5.4.277 (coolsnowwolf#12191) kernel: bump 5.10 to 5.10.218 (coolsnowwolf#12190) kernel: bump 5.15 to 5.15.160 (coolsnowwolf#12188) ramips: add support for H3C TX180x series devices
467815891a
pushed a commit
to 467815891a/lede
that referenced
this pull request
Jun 1, 2024
OpenFi 5Pro is a 2.4/5 GHz band 11ac router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 512 MB - Flash : SPI-NOR 64MB (W25Q512) - WLAN : 2.4/5 GHz 2T2R (MT7603/MT7613) - Ethernet : 2x 10/100/1000 Mbps - LEDs/Keys (GPIO) : 3x/2x - UART : 1xUART - settings : 115200n8 How to upgrade image in uboot: 1. press reset button when boot for 5sec. 2. access 192.168.21.1 in web ui. 3. select image and upload
yjh126yjh
pushed a commit
to yjh126yjh/lede
that referenced
this pull request
Jun 1, 2024
* https://github.com/coolsnowwolf/lede: elfutils: fix build with GCC 12/13 x86: 6.6: Activate CONFIG_FB_DEVICE kernel: Add CONFIG_FB_DEVICE to kmod-fb ramips: add support for JDCloud RE-CP-02 ramips: gl-mt1300: downclock SPI to 50MHz build: introduce PKG_BUILD_FLAGS ramips: add support for OpenFi 5Pro (coolsnowwolf#12196) hostapd: fix mbo module build kernel: bump 6.6 to 6.6.32 (coolsnowwolf#12186) kernel: bump 6.1 to 6.1.92 (coolsnowwolf#12187) mtd: spi-nor: add support for Winbond W25Q512 mvebu: add support for QNAP QHora-321/322 with commo image base-files: add legacy-sdcard sysupgrade support kernel: bump 5.4 to 5.4.277 (coolsnowwolf#12191) kernel: bump 5.10 to 5.10.218 (coolsnowwolf#12190) kernel: bump 5.15 to 5.15.160 (coolsnowwolf#12188)
hguandl
pushed a commit
to hguandl/lede
that referenced
this pull request
Jun 4, 2024
OpenFi 5Pro is a 2.4/5 GHz band 11ac router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 512 MB - Flash : SPI-NOR 64MB (W25Q512) - WLAN : 2.4/5 GHz 2T2R (MT7603/MT7613) - Ethernet : 2x 10/100/1000 Mbps - LEDs/Keys (GPIO) : 3x/2x - UART : 1xUART - settings : 115200n8 How to upgrade image in uboot: 1. press reset button when boot for 5sec. 2. access 192.168.21.1 in web ui. 3. select image and upload
github-actions bot
added a commit
to jmmes/lede
that referenced
this pull request
Jun 5, 2024
* https://github.com/coolsnowwolf/lede: (48 commits) rockchip: fix rk3568 nvme detection issue tools: fix build on macOS Sonoma (coolsnowwolf#12212) ramips: mt7621: fixes gpio config elfutils: fix build with GCC 12/13 x86: 6.6: Activate CONFIG_FB_DEVICE kernel: Add CONFIG_FB_DEVICE to kmod-fb ramips: add support for JDCloud RE-CP-02 ramips: gl-mt1300: downclock SPI to 50MHz build: introduce PKG_BUILD_FLAGS ramips: add support for OpenFi 5Pro (coolsnowwolf#12196) hostapd: fix mbo module build kernel: bump 6.6 to 6.6.32 (coolsnowwolf#12186) kernel: bump 6.1 to 6.1.92 (coolsnowwolf#12187) mtd: spi-nor: add support for Winbond W25Q512 mvebu: add support for QNAP QHora-321/322 with commo image base-files: add legacy-sdcard sysupgrade support kernel: bump 5.4 to 5.4.277 (coolsnowwolf#12191) kernel: bump 5.10 to 5.10.218 (coolsnowwolf#12190) kernel: bump 5.15 to 5.15.160 (coolsnowwolf#12188) ramips: add support for H3C TX180x series devices ...
github-actions bot
added a commit
to shuaidi/lede
that referenced
this pull request
Jun 6, 2024
* https://github.com/coolsnowwolf/lede: (46 commits) rockchip: sync rk3568 upstream dts changes rockchip: fix rk3568 nvme detection issue tools: fix build on macOS Sonoma (coolsnowwolf#12212) ramips: mt7621: fixes gpio config elfutils: fix build with GCC 12/13 x86: 6.6: Activate CONFIG_FB_DEVICE kernel: Add CONFIG_FB_DEVICE to kmod-fb ramips: add support for JDCloud RE-CP-02 ramips: gl-mt1300: downclock SPI to 50MHz build: introduce PKG_BUILD_FLAGS ramips: add support for OpenFi 5Pro (coolsnowwolf#12196) hostapd: fix mbo module build kernel: bump 6.6 to 6.6.32 (coolsnowwolf#12186) kernel: bump 6.1 to 6.1.92 (coolsnowwolf#12187) mtd: spi-nor: add support for Winbond W25Q512 mvebu: add support for QNAP QHora-321/322 with commo image base-files: add legacy-sdcard sysupgrade support kernel: bump 5.4 to 5.4.277 (coolsnowwolf#12191) kernel: bump 5.10 to 5.10.218 (coolsnowwolf#12190) kernel: bump 5.15 to 5.15.160 (coolsnowwolf#12188) ...
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
OpenFi 5Pro is a 2.4/5 GHz band 11ac router, based on MT7621A.
Specification:
How to upgrade image in uboot